PUMPS AND EQUIPMENT
PRODUCTION AND SALE

1Ks 32-150 - Centrifugal condensate pumps 1Ks


  • Series description
  • Technical characteristics
  • Downloads
1Ks
  • Multistage
  • Boiler water
  • Boiler water
  • Condensate removal
  • Clear water
  • Hot water
  • Condensate

Function

Centrifugal condensate pumps 1Кs series and electric pump units on their base are intended for handling condensate or fresh water having a рН value = 6.8...9,2, and containing solid impurities with a concentration not exceeding 5 mg/l and with a maximum size of up to 0,1 mm.

The pumps (units) are used in a steam-and-water supply lines of the electric power stations, which burn organic fuel.

The pumps (units) are related to items of aspect 2, restorable ones as per GOST 27.003-90.

General safety requirements for pumps and units are correspond to GOST R 52743-2007.

Pumps are manufactured in climatic version «UHL», location category 4 and in climatic version «Т», location category 2 as per GOST 15150-69.

1Кs pumps and electric pump units on their base are not intended for servicing in explosion-and-fire hazard productions.


Design

The unit consists of a pump and a driven motor, mounted on a common baseplate and connected with elastic coupling with rubber-bushed studs for the pumps 1Кs32, 1Кs50 and 1Кs80 and by means of elastic coupling provided with a sprocket just for the pump 1Кs20.

1Кs pump - centrifugal horizontal sectional with one-sided arrangement of the impellers.

The suction nozzle is arranged in the suction body and is directed to the right off the horizontal axis of the pump as viewed from the drive end. The delivery nozzle is arranged in the delivery body and is directed vertically upward.

The air-tightness of field joints of the sections, suction body, screw conveyer case and delivery body is ensured by rings made out of the heat-resistant rubber.

The rotor of the pump consists of a shaft, impellers, screw conveyer, balance drum (in 1Кs20 pumps), bushings, sealing components and fasteners.

The rotor of the pump consists of a shaft, impellers, screw conveyer, balance drum (in 1Кs20 pumps), bushings, sealing components and fasteners.

1Кs20 is relieved from axial thrusts by way of the drum. 1Кs50, 1Кс32 and 1Кd80 pumps are provided with impellers being relieved. The residual axial thrusts are taken up by the bearing.

The sense of rotation for 1Кs20pumps - right-hand (clockwise), for 1Кs50, 1Кs32 and 1Кs80 pumps - left-hand (counter-clockwise), if viewed from the motor side.

The final seals of the pump – are stuffing box seals.


Application

  • pumping of condensate and hot water in vapour-water systems of power stations
  • pumping of condensate at enterprises of power system
  • pumping of condensate and hot water in boiler rooms of the industrial enterprises

Features /Advantages

  • low NPSHa
  • stuffing box made of modern thermal expanded graphite material considerably reduces time for maintenance 

Technical parameters

Options Values
Series 1Ks
Flow (nomin.), m³/h 32
Head, m 150
Pump power input (max.), kW 25
Rotation speed, rpm 2950
Rotation speed, c˜¹ 49
Pump inlet pressure, kgf/sm², max 10
Pump efficiency,% 66
Admissible positive suction head, m, max 1.6

Pump type key

Example: 1Кs 50-55 UHL 4 TU 3631-056-05747979-97 , where :

  • 1 - modification serial number;;
  • Кs - condensate pump;
  • 50 - capacity, m3/h;
  • 55 - head, m;
  • UHL - climatic version;
  • 4 - location category.

Instruction manual :

All technical documentation in the Russian version of the site »

Certificates, permits :

All certificates, permits in the Russian version of the site »

Order forms :

  • "General order form for pumps"
    Download
    (19.07.2013 / 54.5 Kb / doc)