Centrifugal double-entry pumps of Delium type and electric pump units on their base designed for pumping:
It is possible to fabricate the pumps (units) for handling liquids with a temperature of up to +120°С. Pumps and units are manufactured in climatic version and location category UXL 3.1, U2 and Т2 as per GOST 15150-69. Pumps and units are designed for the regions with seismic activity up to grade 7 for the cast-iron make and up to grade 9 for steel make in conformity with MSK-64 scale.
Pumps and units are made in accordance with general safety requirements as per GOST 31839-2012. The units furnished with pumps having a modification index «Е» and equipped with explosion –proof electric motors may be used in explosion-and-fire hazard productions, area class 1 and 2 as per GOST 30852.9-2002.
Pump of Delium type - is centrifugal double-entry horizontal single-stage machine with double-sided semivolute delivery of liquid to the impeller of double-entry and with volute discharge. It is possible to fabricate the unit of vertical modification.
The principle of operation of the pump consists in transformation of mechanical power of the drive into the hydraulic energy of the liquid due to hydrodynamic influence of the blade system of the impeller, inlet and outlet.
Electric pump unit consists of the pump and driving motor, mounted on common welded foundation frame and interconnected by coupling.
The casing of the pump is an iron casting or steel casting, which has a joint in the horizontal plane passing through the axis of the rotor. The suction and delivery branch pipes of the pump are positioned in lower portion of the casing and are directed in different directions, owing to which it is possible to disassemble and repair the pump without disconnecting pipelines and removing the electric motor. Mounting dimensions of the flanges of the suction and delivery pipelines are made as per GOST 12815-80 (at the Customer's request it is admissible to produce the flange version as per GOST 12815-80).
The rotor of the pump is put in rotation by electric motor through the coupling. The accuracy class of the rotor balancing G 6,3 in conformity with GOST ISO 1940-1-2007.
The radial ball bearings and radial roller bearings, which are lubricated by consistent grease, serve as rotor supports for the horizontal pumps. For the vertical pumps provision is made for the radial-thrust double-row ball bearing which is lubricated by consistent grease and the plain bearing lubricated by pumped liquid.
The sense of rotation of the rotor is right-handed (clockwise), if viewed from the drive end. At the Customer's request it is possible to fabricate the pump with left-handed rotation of the rotor (counterclockwise).
Impeller – is of double-entry type; it allows to place the axial forces in equilibrium. The residual axial forces are taken by ball bearings.
To prevent leakage of liquid along the shaft provision is made in the pump casing for stuffing box seals or single end-face seals. When handling liquids with a temperature of up plus 60°С the water lock of the gland is carried out by supplying liquid to the gland ring through the crossover pipe. Delivery of barrier and cooling liquid to the zone of the gland seal at a temperature of liquid being pumped above 333К (plus 60°С) is effected from the external source.
To transmit the torque from the electric motor shaft to the pump shaft use is made of the couplings with rubber-bushed studs.
At the Customer's request the unit may be completed by semi-rigid plate couplings for the corresponding moments. The coupling are provided with the guard.
The frame of the unit is a welded construction made of rolled iron. The unit on the frame is attached to the foundation with the help of foundation (anchor bolts).
1. Suction and delivery branch pipes are in line
2. Dimensions of the flanges are made as per DIN/ANSI/ISO.
The dimensions of the chambers of the end-face seals correspond to API 682 in order to accommodate seals of different manufacturers.
The construction design of the pump was worked out with due consideration of possible usage and operation in the regions having a seismicity of up to grade 9 earthquake as per MSK-64.
Большой выбор материальных исполнений обеспечивает возможность применения насосов для всех отраслей промышленности.
В качестве привода могут быть использованы электродвигатель, бензиновый/дизельный двигатель, турбина.
Превосходная всасывающая способность, низкий NPSH.
3. High level of unification of the main subassemblies for different standard sizes considerably reduces the cost of the maintenance.
4. The gland or single/double end-face seals are used in the capacity of shaft seals. The pumps for handling liquids with solid inclusions are provided with hydro cyclone.
5. The bearings may be provided with consistent grease or with lubricant in the oil bath. For the second variant provision is made for the cooling system. The service life of the bearings is not below 100000 hours.
6. The shaft is completely isolated from the liquid being handled.
7. Use of wear-resistant materials for the rings of the groove seals. Modifications with replaceable rings on the impeller.
8. Modifications with hydrophobic coating allow to increase the efficiency and to reduce the wear and erosion.
9. Two-coil spiral within the casing reduces the radial thrust onto the shaft.
10. Modifications with enforced bearings in order to increase the reliability during operation with severe loads under heavy conditions.
11. The pumps were designed by 3D modeling. The flow passage was designed with use of state-of-the-art methods of the computational fluid dynamics in order to achieve maximum efficiency.
12. The use of two interchangeable impellers at least allows to match the pumps for any requirements.
Narrowed dimension between the bearings and the optimized hydraulics reduce the cost of the pump life cycle.
Vibration sensors and temperature sensing elements may be used/have been installed in the bearing bodies.
12. Self-installing cover of the pump casing considerably simplifies the mounting.
Pumps may be supplied not only on the common frame with electric motors, but also on the separated frame.
The pumps may be used for horizontal installation and alike for the vertical installation. Vertical installation is regarded as the standard option.
|Flow (nomin.), m³/h||605|
|Pump power input (max.), kW||170|
|Rotation speed, rpm||1450|
|Rotation speed, c˜¹||24.2|
|Admissible positive suction head, m, max||2.5|
For example: DV 200-660-A-b-S/S-t-Е-UXL 3.1 ТU3631-426-00217975-2014 , where :