SH 40-4-19,5/4-23 - Gear-type pumps SH, NMSH, NMSHF (for ships)

  • Series description
  • Technical characteristics
  • Downloads
SH, NMSH, NMSHF (for ships)
  • Gear-type
  • Shipbuilding
  • Highly viscous
  • rock-oil
  • masut
  • oil
  • diesel fuel


Gear pumps of SH, NMSH, NMSHF type and electric pump units on their base are intended for pumping petroleum products (oil, diesel fuel, petroleum, fuel oil) and other liquids possessing lubricating properties, containing no mechanical particles and non-corrosive to pump parts.

The viscosity of the pumped liquids is from 0,018*10-4 up to 22,00*10-4 m2/s (1,08…300°E), temperature –up to +70°С. The lower limit of viscosity is restricted by lubricating power of the pumped liquid, the upper limit – by power of the electric motor and suction capacity of the pump. While placing purchase order do not fail to agree viscosity limits and working temperature of the pumped liquid.

Pumps and units are related to the items of aspect 1 (repairable) as per GOST 27.003-9.

Pumps and units are fabricated in climatic version U, location category 2, 3 or Т2, Т5 as per GOST 15150-69. For the orders of Russian Maritime Register of Shipping (RMRS), the pumps (units) are produced in climatic version OM, location category 2, 5 GOST 15150-69, and may be installed on the marine ships with unlimited region of navigation, as well as in the boiler and engine rooms of the ships having the following automation mark A1 and A2 within the RMRS classification of ships.

By the Client’s request, special pump embodiments for servicing in explosion-and-fire hazard productions of classes V-1а, V-1b, V-1g, V-II as per Electric Installation Code may be delivered.


Electric pump unit consists of gear pump end electric motor which are mounted:

- for SH, NMSH pumps – on common plate (frame) and the coupling protected by housing;

- for NMSHF pumps – with the help of the connecting pieces (welded or cast one) and the coupling.

At the Client's request the pump may be delivered in a complex with the coupling or without the coupling, less the electric motor and plate (frame) or with no connecting piece.

Gear pump is designed as positive-displacement type pumps. As soon as the driving and driven rotors are set in rotation, a vacuum is created on the suction side; as a result, the liquid under the action of atmospheric pressure fills the cavities between gear teeth and moves in them from the inlet port to the outlet port. At the outlet while the teeth are in engagement the liquid is extruded into the system.

The pump consists of the following main parts and subassemblies: working mechanism, casing with rear cover and upright, safety and relief valves, end-face seal.

End-face seals may be of both productions: imported seals and own-produced seals. At the Client's request the stuffing box is possible (maximum allowable pressure of the medium of 2,0 МPа (20 kgf/сm²), for OMTI oil - is not supplied).

Working mechanism consists of two rotors – the driving and driven rotors and the bushings (plain bearings).


  • supply of diesel fuel in fuel systems of diesel ship units
  • supply of fuel (mazut, diesel fuel) in power supply systems of marine boilers
  • supply of greasing liquids in lubrication systems of marine turbines and other high-loaded mechanisms
  • in marine hydraulic systems 

Features /Advantages

  • simple design provides high reliability of pump
  • casing-gears clearance adjusting device provides high pump efficiency
  • virtually no need in maintenance
  • compact size for use in confined space
  • single mechanical seals made of different materials (no need in barrier liquid supply)
  • approved by Russian Maritime Register of Shipping (RMRS)

Technical parameters

Options Values
Series SH, NMSH, NMSHF (for ships)
Flow, m³/h, least 19
Pump power input (max.), kW 5
Rotation speed, rpm 980
Rotation speed, c˜¹ 16.3
Pump outlet pressure, kgf/sm², max 4
Full overflow pressure, MPa 0.6
Pump efficiency,% 50
Voltage, V 220/380
Frequency, Hz 50
Type of current AC
Weight, kg 53
Kinematic viscosity of pumped liquid (calculated), ° VU 10
Kinematic viscosity of pumped liquid (rang), ° VU 1,08...35
Allowable vacuum suction, m 5

Pump type key

For example NMSHF5-25-4,0/4B-3 ОМ5 TU26-06-1558-89, where:

  • NMSHF – designation of the pump type: SH – gear pump, NMSH – gear oil foot-mounted pump, NMSHF – gear oil flange mounted pump,
  • 5 - capacity of the pump in litres per 100rev
  • 25 - maximum pressure of the pump, kgf/сm²
  • 4,0 – capacity of the pump when coupled with motor, м³/ч
  • 4 – outlet pressure of the pump when coupled with motor, kgf/сm²
  • B - conventional designation of the flow passage material: without designation – cast iron, B – bronze, Yu – aluminium and its alloys, К – stainless steel
  • 3 - unit modification acc. to type of drive (Rp – variable drive)
  • ОМ5 – climatic version and location category as per GOST15150-69

Instruction manual :

All technical documentation in the Russian version of the site »

Certificates, permits :

All certificates, permits in the Russian version of the site »

Order forms :

  • "General order form for pumps"
    (19.07.2013 / 54.5 Kb / doc)