PUMPS AND EQUIPMENT
PRODUCTION AND SALE

SD 16/10b - Cantilevered СD pumps for drainage and sewerage system


  • Series description
  • Technical characteristics
  • Downloads
  • Related content
  • Overhung
  • Metallurgy, mining
  • Water supply
  • Drainage
  • Waste water
  • Clear water
  • Waste water
  • Waste fecal water

Function

The centrifugal СD pumps and electric pump units on their base are designed for pumping urban and industrial sewage waters and other non-aggressive liquids ( including liquids with petroleum products admixture not exceeding 2%), at a density of up to 1050 kg/m3 with рН=6 - 8,5, at a temperature of up to 353К (80°С) and with a content of abrasive particles having a dimension of up to 5 mm, and not over 1% by mass. The maximum concentration of the pumped mass is 2%. The maximum content of the gas in the handled medium is 5%.

The pumps may be used in other productions as well, if their parameters and modifications meet service conditions and safety engineering concerns of such productions. The pump (units) are related to the products of general purpose, aspect I (repairable ones) as per GOST 27.003-90 and are fabricated in climatic version UXL for location category 3.1 and in climatic version Т, location category 2 as per GOST 15150-69. The pumps and units are intended for the regions with seismic activity of up to 7 points inclusive on the MSK-64 scale.

The pumps and units have been executed in explosion-and-fire hazard premises.


Design

The pumps of CD type – are centrifugal, horizontal, cantilevered, with gland seal of the shaft.

The casing of the pump is an iron casting, the internal cavity of which is made a spiral bleed (branch line) passing into the delivery branch pipe. The delivery branch pipe – is sideways (lateral) one which is executed inside the casing in the same plane with the axis of rotation (vertically). In dependence on conditions of assembly and operation the delivery branch pipe may be turned for 90°, 180° or 270°.

The inlet branch pipe is executed in the casing cover along the axis of rotation (horizontally). The cover of the casing is bolted to the casing and is sealed by gasket. The bracket is attached to the casing of the pump by way of studs.

Hyadraulic waterlock and cooling of the gland seal is ensured by way of supplying pure water to the sealing zone, with a pressure exceeding that one at the inlet port for not less than 0,1 – 0,15 МPа (1 – 1,5 kgf/сm2).

Impeller – is the centrifugal, single-entry impeller of closed type. The supple of liquid to the impeller is an axial one.

The rotor of the pump is put in rotation by electric motor via coupling with rubber-bushed studs. It is admitted to use other types of couplings. Two radial bearings installed in the bracket are served as rotor supports. Bearings are lubricated by consistent grease Litol 24 GOST21150-87.

The sense of rotation of the rotor is right-handed (clockwise), as viewed from the motor end.

In the bottom portion of the casing there is an open closed by plug for draining the residue of liquid during shutdown of the pump for a prolonged time period. Executed in the bracket is an opening intended for removal of liquid leakage along the gland seal. In the top portion of the casing there is an opening, closed by plug, which is meant for releasing an air in the course of priming the pump and suction line with liquid to be pumped.

Mounting dimensions of the flanges – as per GOST33259-2015, type 01.

Overall dimensions of the pump СД 160/45:      L= 1050 mm, В= 595 mm, Н= 620 mm

Mass of the pump: 404 kg


Application

  • the main consumers and users of  the said pump units are: enterprises of heavy equipment industry, urban water utilities, thermal el. stations and others facilities
  • the pump unit may be used for irrigation of gardens and kitchen gardens if individual farms
  • for transfer and drainage of sewer drains at the industrial enterprises including the enterprises of the metallurgical and oil processing industries
  • in drainage systems for sewage treatment
  •  in water disposal systems of sewer drains of industrial and economic facilities  ( housing and public utilities, municipal water & sewer  enterprises)

Features /Advantages

  • the casing of the pumps are provided with their own support foots: thus allowing to dismantle the pump without disconnecting the pipelines
  • it is fully interchangeable with the pumps of CD pumps manufactured by other Producers
  • the availability of various versions of the impeller diameters, inclusive those ones  requested by the Customer makes it possible to select the pump parameters in dependence on characteristics demanded in-situ (namely: at the place of operation)

Technical parameters

Options Values
Series SD
Flow (nomin.), m³/h 12.5
Head, m 6.7
Pump power input (max.), kW 0.8
Rotation speed, rpm 1450
Rotation speed, c˜¹ 24.2
Pump inlet pressure, MPa, max 0.25
Pump inlet pressure, kgf/sm², max 2.5
Pump efficiency,% 54
Voltage, V 220,380
Frequency, Hz 50
Type of current AC
Admissible positive suction head, m, max 2.0

Pump type key

For example  СD 160/45 а УХЛ3.1 Specs. 28.13.14-016-00217975-2017, where:

  • СD  - is the sewage-mix pump;
  • 160 – is the capacity, m3/h; 
  • 45 – is the head, m; 
  • а, б – are indices of turning of the impeller (а or б – reduced diameters of the impeller). 
  • Technical specifications (Specs.) 28.13.14-016-00217975-2017 – is the designation of the  basic technical document for delivery